Skip to main content

Big Data in Biology Summer School

Introduction to RNA-Seq

Member for

3 years 1 month
Full name
Gary Chiang

This four-day course provides an introduction to methods for analysis of RNA-seq data. A typical RNA-seq workflow will be featured, starting from quality assessment of raw data, mapping (bwa, kallisto), differential expression analysis (DESeq2), and downstream analyses and visualization. The course also describes analysis methods for dealing with single-cell RNA-Seq data. Participants will gain hands-on experience using these tools in a Linux command line environment.

Preferred or Prerequisite Skills:
None

Computer Requirement:
Students should have their own laptop computer. UT EID is required for wireless access on campus. Please be sure you know both your UT EID when you come to class. To obtain a UT EID, go here.

Course ID
CB26034
Status
Open
Modality
Hybrid, but in-person encouraged
Course Closes
Wed, May 20
Procard Disclaimer

If you use the UT ProCard for payment of courses, please be aware that you can only charge ONCE per 24 hour period. Any attempts to charge more courses will fail, and you will not be registered.

For example, you may add one to many courses for one student into your shopping cart at any one time, and charge them to the ProCard, and you should receive a "registration successful!" page at the end. This is because you registered ONCE for ONE student. If you attempt to register and pay again, for example, for a different student, this will trigger the UT ProCard security system to stop payment, and your registration will not be successful. A page stating this fact will occur after you attempt to process payment. It looks a lot like the "registration was successful" page.

Ways to avoid this are: use the ProCard after 24 hours have passed, or the student may use their credit card and be reimbursed later through the usual UT accounting methods, or process the registration with an IDT, otherwise known as an Interdepartmental Transfer (talk to someone in your department that handles the accounts).

Course Semester
Tue, May 26 - Fri, May 29
1:00 pm - 4:00 pm

Introduction to Biocomputing: Working in Unix and R

Member for

3 years 1 month
Full name
Gary Chiang

This course will cover the Unix command line and data analysis in R within the context of biocomputing. We will start at the Unix command line and cover command line tools for manipulating data files, before transitioning to RStudio to cover introductory topics and engage with data analysis methods in R. The course will finish up with tidyverse tools and methods for visualizing data using ggplot2.

Preferred or Prerequisite Skills:
None

Computer Requirement:
Students should have their own laptop computer. A UT EID is required for wireless access on campus. Please be sure you know both your UT EID when you come to class. To obtain a UT EID, go here.

Course ID
CB26032
Status
Open
Modality
Hybrid, but in-person encouraged
Course Closes
Wed, May 27
Procard Disclaimer

If you use the UT ProCard for payment of courses, please be aware that you can only charge ONCE per 24 hour period. Any attempts to charge more courses will fail, and you will not be registered.

For example, you may add one to many courses for one student into your shopping cart at any one time, and charge them to the ProCard, and you should receive a "registration successful!" page at the end. This is because you registered ONCE for ONE student. If you attempt to register and pay again, for example, for a different student, this will trigger the UT ProCard security system to stop payment, and your registration will not be successful. A page stating this fact will occur after you attempt to process payment. It looks a lot like the "registration was successful" page.

Ways to avoid this are: use the ProCard after 24 hours have passed, or the student may use their credit card and be reimbursed later through the usual UT accounting methods, or process the registration with an IDT, otherwise known as an Interdepartmental Transfer (talk to someone in your department that handles the accounts).

Course Semester
Mon, Jun 1 - Fri, Jun 5
9:00 am - 12:00 pm

Introduction to Python

Member for

3 years 1 month
Full name
Gary Chiang

This five-day course will introduce students to basic concepts in programming using the Python language, establishing a foundation for scientific computing. Trainees will learn introductory topics such as data structures, control flow, functions, file input/output, and data parsing. The class will work with SciPy libraries like Pandas. Trainees will have full access to the teacher’s course book and course content (datasets, scripts, and jupyter notebooks).

Preferred or Prerequisite Skills:
None

Computer Requirement:
This class is offered in-person. Students must provide laptops able to connect to the internet, and a Firefox or Chrome browser. UT EID is required for wireless access. Please be sure you know your UT EID when you come to class. To obtain a UT EID, go here.

Course ID
CB26035
Status
Open
Modality
In-person
Course Closes
Wed, May 27
Procard Disclaimer

If you use the UT ProCard for payment of courses, please be aware that you can only charge ONCE per 24 hour period. Any attempts to charge more courses will fail, and you will not be registered.

For example, you may add one to many courses for one student into your shopping cart at any one time, and charge them to the ProCard, and you should receive a "registration successful!" page at the end. This is because you registered ONCE for ONE student. If you attempt to register and pay again, for example, for a different student, this will trigger the UT ProCard security system to stop payment, and your registration will not be successful. A page stating this fact will occur after you attempt to process payment. It looks a lot like the "registration was successful" page.

Ways to avoid this are: use the ProCard after 24 hours have passed, or the student may use their credit card and be reimbursed later through the usual UT accounting methods, or process the registration with an IDT, otherwise known as an Interdepartmental Transfer (talk to someone in your department that handles the accounts).

Course Semester
Mon, Jun 1 - Fri, Jun 5
1:00 pm - 4:00 pm

Principles of Machine Learning for Bioinformatics

Member for

3 years 1 month
Full name
Gary Chiang

This four-day course will introduce a selection of machine learning methods used in bioinformatic analyses with a focus on RNA-seq gene expression data. We will cover unsupervised learning, dimensionality reduction and clustering; feature selection and extraction; and supervised learning methods for classification (e.g., random forests, SVM, LDA, kNN, etc.) and regression (with an emphasis on regularization methods appropriate for high-dimensional problems). Participants will have the opportunity to apply these methods as implemented in R and python to publicly available data.

Preferred or Prerequisite Skills:
This course is recommended for students with some prior knowledge of either R or python. Participants are expected to provide their own laptops with recent versions of R and/or python installed. Students will be instructed to download several free software packages (including R packages and python libraries including pandas and sklearn).

Computer Requirement:
Students should have their own laptop computer. UT EID is required for wireless access. Please be sure you know your UT EID when you come to class. To obtain a UT EID, go here.

Course ID
CB26037
Status
Open
Modality
Hybrid
Course Closes
Wed, Jun 10
Procard Disclaimer

If you use the UT ProCard for payment of courses, please be aware that you can only charge ONCE per 24 hour period. Any attempts to charge more courses will fail, and you will not be registered.

For example, you may add one to many courses for one student into your shopping cart at any one time, and charge them to the ProCard, and you should receive a "registration successful!" page at the end. This is because you registered ONCE for ONE student. If you attempt to register and pay again, for example, for a different student, this will trigger the UT ProCard security system to stop payment, and your registration will not be successful. A page stating this fact will occur after you attempt to process payment. It looks a lot like the "registration was successful" page.

Ways to avoid this are: use the ProCard after 24 hours have passed, or the student may use their credit card and be reimbursed later through the usual UT accounting methods, or process the registration with an IDT, otherwise known as an Interdepartmental Transfer (talk to someone in your department that handles the accounts).

Course Semester
Mon, Jun 15 - Thu, Jun 18
9:00 am - 12:00 pm

Introduction to Statistical Modeling

Member for

3 years 1 month
Full name
Gary Chiang

This course is a hands-on introduction to building and interpreting statistical models in R, with a focus on real-world applications. We will cover key concepts in hypothesis testing, multiple linear regression, and logistic regression. You will learn how to choose appropriate modeling approaches, fit models using R, check assumptions, interpret results, and clearly communicate your findings. Each topic will include a brief introduction to foundational concepts, a demonstration of analysis in R, and guided practice through interactive coding exercises. Emphasis will be placed on using statistical modeling to answer research questions within reproducible workflows. By the end of the course, the goal is for you to be able to apply statistical modeling to your own data.

Preferred or Prerequisite Skills:
This course is recommended for students with some prior knowledge of R (in particular, we recommend taking the “Introduction to R for Biologists” summer school course offered above).

Computer Requirement:
Participants are expected to provide their own laptops.

Course ID
CB25035
Status
Closed
Instructor
Modality
Hybrid, but in-person encouraged
Course Closes
Wed, May 28
Procard Disclaimer

If you use the UT ProCard for payment of courses, please be aware that you can only charge ONCE per 24 hour period. Any attempts to charge more courses will fail, and you will not be registered.

For example, you may add one to many courses for one student into your shopping cart at any one time, and charge them to the ProCard, and you should receive a "registration successful!" page at the end. This is because you registered ONCE for ONE student. If you attempt to register and pay again, for example, for a different student, this will trigger the UT ProCard security system to stop payment, and your registration will not be successful. A page stating this fact will occur after you attempt to process payment. It looks a lot like the "registration was successful" page.

Ways to avoid this are: use the ProCard after 24 hours have passed, or the student may use their credit card and be reimbursed later through the usual UT accounting methods, or process the registration with an IDT, otherwise known as an Interdepartmental Transfer (talk to someone in your department that handles the accounts).

Course Semester
June 2 - June 6
1:30 pm - 4:30 pm

Principles of Machine Learning for Bioinformatics

Member for

3 years 1 month
Full name
Gary Chiang

This four-day course will introduce a selection of machine learning methods used in bioinformatic analyses with a focus on RNA-seq gene expression data. We will cover unsupervised learning, dimensionality reduction and clustering; feature selection and extraction; and supervised learning methods for classification (e.g., random forests, SVM, LDA, kNN, etc.) and regression (with an emphasis on regularization methods appropriate for high-dimensional problems). Participants will have the opportunity to apply these methods as implemented in R and python to publicly available data.

Preferred or Prerequisite Skills:
This course is recommended for students with some prior knowledge of either R or python. Participants are expected to provide their own laptops with recent versions of R and/or python installed. Students will be instructed to download several free software packages (including R packages and python libraries including pandas and sklearn).

Computer Requirement:
Students should have their own laptop computer. UT EID is required for wireless access. Please be sure you know your UT EID when you come to class. To obtain a UT EID, go here.

Course ID
CB25038
Status
Closed
Modality
Hybrid
Course Closes
Thu, Jun 12
Procard Disclaimer

If you use the UT ProCard for payment of courses, please be aware that you can only charge ONCE per 24 hour period. Any attempts to charge more courses will fail, and you will not be registered.

For example, you may add one to many courses for one student into your shopping cart at any one time, and charge them to the ProCard, and you should receive a "registration successful!" page at the end. This is because you registered ONCE for ONE student. If you attempt to register and pay again, for example, for a different student, this will trigger the UT ProCard security system to stop payment, and your registration will not be successful. A page stating this fact will occur after you attempt to process payment. It looks a lot like the "registration was successful" page.

Ways to avoid this are: use the ProCard after 24 hours have passed, or the student may use their credit card and be reimbursed later through the usual UT accounting methods, or process the registration with an IDT, otherwise known as an Interdepartmental Transfer (talk to someone in your department that handles the accounts).

Course Semester
June 16 - June 20 (no class on June 19)
9:00 am - 12:00 pm

Introduction to RNA-Seq

Member for

3 years 1 month
Full name
Gary Chiang

This five-day course provides an introduction to methods for analysis of RNA-seq data. It assumes familiarity and comfort with Linux command line. A typical RNA-seq workflow will be featured, starting from quality assessment of raw data, mapping (bwa, kallisto), differential expression analysis (DESeq2), and downstream analyses and visualization. The course also describes analysis methods for dealing with single-cell RNA-Seq data. Participants will gain hands-on experience using these tools in a Linux command line environment.

Preferred or Prerequisite Skills:
Familiarity working in a UNIX environment. Consider taking the “Introduction to Biocomputing” or “Introduction to Core NGS Concepts and Tools” summer school course to refresh your UNIX skills.

Computer Requirement:
Students should have their own laptop computer. UT EID is required for wireless access on campus. Please be sure you know your UT EID when you come to class. To obtain a UT EID, go here.

Course ID
CB25037
Status
Open
Modality
Hybrid, but in-person encouraged
Course Closes
Wed, Jun 04
Procard Disclaimer

If you use the UT ProCard for payment of courses, please be aware that you can only charge ONCE per 24 hour period. Any attempts to charge more courses will fail, and you will not be registered.

For example, you may add one to many courses for one student into your shopping cart at any one time, and charge them to the ProCard, and you should receive a "registration successful!" page at the end. This is because you registered ONCE for ONE student. If you attempt to register and pay again, for example, for a different student, this will trigger the UT ProCard security system to stop payment, and your registration will not be successful. A page stating this fact will occur after you attempt to process payment. It looks a lot like the "registration was successful" page.

Ways to avoid this are: use the ProCard after 24 hours have passed, or the student may use their credit card and be reimbursed later through the usual UT accounting methods, or process the registration with an IDT, otherwise known as an Interdepartmental Transfer (talk to someone in your department that handles the accounts).

Course Semester
June 9 - June 13
1:00 pm - 4:00 pm

Introduction to Python

Member for

3 years 1 month
Full name
Gary Chiang

This five-day course will introduce students to basic concepts in programming using the Python language, establishing a foundation for scientific computing. Trainees will learn introductory topics such as data structures, control flow, functions, file input/output, and data parsing. The class will work with SciPy libraries like Pandas. Trainees will have full access to the teacher’s course book and course content (datasets, scripts, and jupyter notebooks).

Preferred or Prerequisite Skills:
None

Computer Requirement:
This class is offered in-person. Students must provide laptops able to connect to the internet, and a Firefox or Chrome browser. UT EID is required for wireless access. Please be sure you know your UT EID when you come to class. To obtain a UT EID, go here.

Course ID
CB25036
Status
Closed
Modality
In-person
Course Closes
Wed, Jun 04
Procard Disclaimer

If you use the UT ProCard for payment of courses, please be aware that you can only charge ONCE per 24 hour period. Any attempts to charge more courses will fail, and you will not be registered.

For example, you may add one to many courses for one student into your shopping cart at any one time, and charge them to the ProCard, and you should receive a "registration successful!" page at the end. This is because you registered ONCE for ONE student. If you attempt to register and pay again, for example, for a different student, this will trigger the UT ProCard security system to stop payment, and your registration will not be successful. A page stating this fact will occur after you attempt to process payment. It looks a lot like the "registration was successful" page.

Ways to avoid this are: use the ProCard after 24 hours have passed, or the student may use their credit card and be reimbursed later through the usual UT accounting methods, or process the registration with an IDT, otherwise known as an Interdepartmental Transfer (talk to someone in your department that handles the accounts).

Course Semester
June 9 - June 13
9:00 am - 12:00 pm

Introduction to Biocomputing: from files to functions to plots

Member for

3 years 1 month
Full name
Gary Chiang

This course will cover the Unix command line and data analysis in R within the context of biocomputing. We will start at the Unix command line and cover command line tools for manipulating data files, before transitioning to RStudio to engage with some more complex data analysis methods in R. The course will finish up with tidyverse tools and methods for visualizing data using ggplot2.

Preferred or Prerequisite Skills:
Some general familiarity with a programming language is assumed. Introductory topics in R will be covered, but at a relatively fast pace.

Computer Requirement:
Students should have their own laptop computer. UT EID is required for wireless access on campus. Please be sure you know your UT EID when you come to class. To obtain a UT EID, go here.

Course ID
CB25033
Status
Closed
Modality
Hybrid
Course Closes
Thu, May 22
Procard Disclaimer

If you use the UT ProCard for payment of courses, please be aware that you can only charge ONCE per 24 hour period. Any attempts to charge more courses will fail, and you will not be registered.

For example, you may add one to many courses for one student into your shopping cart at any one time, and charge them to the ProCard, and you should receive a "registration successful!" page at the end. This is because you registered ONCE for ONE student. If you attempt to register and pay again, for example, for a different student, this will trigger the UT ProCard security system to stop payment, and your registration will not be successful. A page stating this fact will occur after you attempt to process payment. It looks a lot like the "registration was successful" page.

Ways to avoid this are: use the ProCard after 24 hours have passed, or the student may use their credit card and be reimbursed later through the usual UT accounting methods, or process the registration with an IDT, otherwise known as an Interdepartmental Transfer (talk to someone in your department that handles the accounts).

Course Semester
May 27 - May 30
1:30 pm - 4:30 pm

Introduction to Core NGS Concepts and Tools

Member for

3 years 1 month
Full name
Gary Chiang

This five-day course provides an introduction to the concepts and vocabulary of Next Generation Sequencing (NGS) with an emphasis on common protocols, tools and file formats used in NGS data analysis. Subjects covered include quality assessment and manipulation of raw NGS sequences (FastQC, cutadapt), read mapping (bwa, bowtie2), the Sequence Alignment Map (SAM) format, and tools for manipulating BAM files (samtools, bedtools). Participants will gain hands-on experience using these and other NGS tools in the Linux command line environment at TACC, as well as exposure to the many bioinformatics resources TACC makes available.

Preferred or Prerequisite Skills:
None. UNIX/Linux command line experience is not required, and becoming familiar with how to use the command line for NGS analysis will be a major focus of this course. However, to get a head start on developing this important skill you can register for our Introductory UNIX short courses.

Computer Requirement:
In order to participate fully in the hands-on exercises students should have their own laptop computer with an SSH client program. Macs have SSH available in the Terminal application. Recent Windows versions have an SSH client built into its PowerShell and Command Prompt programs, or PuTTy can be used if SSH is not available. A TACC Account and UT EID are also required. To obtain a UT EID, go here. To sign up for a TACC account, go here.

Course ID
CB25034
Status
Open
Modality
Hybrid, but in-person recommended
Course Closes
Thu, May 29
Procard Disclaimer

If you use the UT ProCard for payment of courses, please be aware that you can only charge ONCE per 24 hour period. Any attempts to charge more courses will fail, and you will not be registered.

For example, you may add one to many courses for one student into your shopping cart at any one time, and charge them to the ProCard, and you should receive a "registration successful!" page at the end. This is because you registered ONCE for ONE student. If you attempt to register and pay again, for example, for a different student, this will trigger the UT ProCard security system to stop payment, and your registration will not be successful. A page stating this fact will occur after you attempt to process payment. It looks a lot like the "registration was successful" page.

Ways to avoid this are: use the ProCard after 24 hours have passed, or the student may use their credit card and be reimbursed later through the usual UT accounting methods, or process the registration with an IDT, otherwise known as an Interdepartmental Transfer (talk to someone in your department that handles the accounts).

Course Semester
June 2 - June 6
9:00 am - 12:00 pm
Subscribe to Big Data in Biology Summer School