IBC FAQs

General Questions

Where can I find out about the IBC Policies and Procedures?

All IBC Policies and Procedures are available online.

Who do I contact about other IBC questions?

Contact the IBC by email at IBC@austin.utexas.edu with any questions.

IBC Protocols

What is an IBC protocol?

An IBC protocol is an online document that describes a research or teaching activity that involves recombinant or synthetic nucleic acid molecules, and biohazardous materials including: human fluids, tissue, or cells, recombinant or synthetic nucleic acid molecules, infectious agents, and toxins. This document must be completed by any investigator wanting to use these materials in research or teaching activities. Protocols must be given full approval prior to the use or collection of these materials. At UT Austin, protocol applications are managed through eProtocol.

Where can I find the form for the IBC protocol?

The IBC protocol form must be created and submitted via eProtocol. EProtocol questions can be found on the eProtocol IBC Information (PDF).

Who can submit an IBC protocol?

The IBC accepts protocols only from tenured, tenure track, or research faculty with assigned research space. Exceptions to this policy will be considered by the IBC on a case-by-case basis.

Where can I find the deadlines for submitting an IBC protocol?

Submission deadlines are found on the meeting dates page.

Will my protocol still make the next meeting if I submit it after the deadline?

Protocols submitted after the meeting deadline are held for the next meeting.

Who do I contact for a status report on my IBC protocol?

Contact the IBC at IBC@austin.utexas.edu.

When is it necessary for me to modify, amend or make changes to my IBC protocol?

Whenever you change the work described in your IBC protocol, you need to update the protocol(s) to reflect the change(s). Protocol amendments are required with any change in host, vector or modified gene expression, any change in biohazardous materials, agents, or toxins used, and any change in procedures, location of your work, or to update IRB, IACUC, or IBC protocol numbers.

I have decided to add a new vector or host, what should I do?

To change or add a new vector or host, your IBC protocol will need to be returned to allow access for changes if it is currently under review. If your protocol is approved, an amendment will need to be submitted and approved to add the new vector or host. Contact the IBC by emailing IBC@austin.utexas.edu to return your protocol(s).

I need to add another transgenic strain to my existing colony, what should I do?

To change or add a new transgenic animal, your IBC protocol will need to be returned to allow access for changes if it is currently under review. If your protocol is approved, an amendment will need to be submitted and approved to add the new vector or host. Contact the IBC by emailing IBC@austin.utexas.edu regarding the status of the proposed addition.

I have decided to collect a different type of sample from my study participants, what should I do?

To change or add a type of sample from your study participant(s), your IBC protocol will need to be returned to allow access for changes if it is currently under review. If your protocol is approved, an amendment will need to be submitted and approved to add the new vector or host. Contact the IBC by emailing IBC@austin.utexas.edu to return your protocol.

What is required for approval of my IBC protocol?

The IBC requires completion of all IBC required training by the PI and lab personnel, current lab Biosafety Manual, and current lab inspection certifying the lab for work at or above the biocontainment level determined by the IBC for approval of the protocol(s).

What is the approval period for IBC protocols?

Most IBC protocols are approved for up to three years. All protocols require a yearly continuing review.

What should I do if the project is the same and nothing needs to change on the protocol?

If there are no changes to your protocol, including locations or updates to IACUC or IRB protocol numbers simply save and submit your continuing review or third year resubmission.

What should I do if I submitted a protocol for renewal but still need to add something?

If you have submitted your protocol for review but need to make a change, contact the IBC by emailing IBC@austin.utexas.edu to return your protocol for changes.

What should I do if my protocol has lapsed approval but I have not completed the project?

All research activities pertaining to the research described in the expired protocol must cease. Contact the IBC by emailing IBC@austin.utexas.edu immediately.

What should I do if I have completed the project and no longer need the IBC protocol?

If you no longer need an IBC protocol, complete a closure report in eProtocol.

What should I do if I have duplicate rDNA or Biosafety protocols?

Duplicate protocols need to be removed from the active database even if they have not been submitted. If the protocols have been submitted, contact the IBC Program Coordinator by email at IBC@austin.utexas.edu to delete one from the database. If the protocol is a Biosafety protocol that has not been submitted, simply go to the bottom of the Biosafety form and select the “Delete” button. If the duplicate rDNA or Biosafety protocol has been previously approved, contact the IBC BEFORE you delete your protocol.

eProtocol

Who can log in to eProtocol?

Access to eProtocol IBC is restricted to current faculty, staff, and students. A University of Texas Electronic ID (UT EID) is required to log on to eProtocol IBC. A UT EID and password provides access to The University of Texas at Austin UT Direct and its services, and identifies authorized users of these services. See the UT EID website for more information.

How do I get access to eProtocol?

If you have a UT EID and are unable to log on to eProtocol IBC, your sponsoring Principal Investigator must contact the IBC.

I have an UT EID and password, but can’t log in. What do I do?

If you are a new faculty member, student, or staff member, your paperwork may not have cycled through the various campus systems yet. If after attempting to log in to eProtocol IBC you are still unable to access the system, contact the IBC.

I tried entering information into eProtocol and received an error message. What do I do?

While you are entering information in eProtocol, the system will often notify you that you have entered information incorrectly or are missing required information. These kinds of messages will appear in red text towards the top of the protocol application page. Sometimes, however, you might attempt to navigate within the system or perform another type of action and you receive a message alerting you to contact the system administrator. If you receive this kind of message, close ALL browser windows and then re-open one window and try logging in again.

What computer/browser do I need?

To access eProtocol IBC, you will need a computer with an Internet connection. If you are on a Windows machine, use Google Chrome as your browser; if on an Apple machine, use Safari as your browser. You may experience difficulties when using other operating system/browser combinations. The pop-up blocking feature of the browser must be disabled (pop-ups must be allowed) while using eProtocol.

How do I create a new protocol?

To create a new protocol, log into eProtocol and from the Investigator dashboard page click on the CREATE PROTOCOL button in the upper right-hand corner of the page. You will need to enter basic information (such as Protocol Title, Personnel Information) before the application form is generated and a protocol number assigned. Once a protocol number has been assigned, you may continue to complete the application, or exit the system and return at a later time to complete. Once you have made all of the necessary modifications click on "SUBMIT FORM" located on the left hand column menu. A window will pop-up to confirm you want to submit, click on "YES."

How can I see certain protocols?

Once logged in to eProtocol, you will have access to see all those (and only those) protocols on which you have been listed in the Personnel Information section.

How do I clone a protocol?

To create a new protocol from an existing protocol, log into eProtocol and click on the "CLONE PROTOCOL" button in the upper right-hand corner of the Investigator dashboard page. Select the protocol you would like to clone and then click on "CLONE PROTOCOL." Select "YES" to confirm you want to clone the selected protocol. Blue text at the top of your home screen will confirm that your cloned protocol was created. Once created, select the cloned protocol and open in "EDIT" mode to begin editing. You may continue to complete the application, or exit the system and return at a later time to complete.

Note on Cloned Protocols: Make sure to review all of the cloned data and ensure that all of the information is current and correct. Many times overlooked information on the protocol will include expired funding sources, new or old personnel that need modification on the personnel information page, and incorrect locations or safety information.

How do I submit a protocol?

After completing your protocol application form, you can submit it to IBC by clicking on the "SUBMIT FORM" button in the left-hand menu of the protocol application form as shown below. You will need to have the protocol application open in "EDIT" mode.

Be patient after clicking submit. The application will automatically check to make sure that all parts of the application form are complete. If the application is complete, a small window will open thanking you for submitting your protocol. If the application is not complete, then a window will open indicating the portions of the application that remain to be completed. Navigate to those areas and complete the required information before attempting to submit again. You may also click directly on the link to be taken directly to the section that needs to be completed. NOTE: If you are listed in the "Other Personnel" section of a protocol, you only have read/view access to that protocol.

How can I edit a protocol?

You will only have access to edit those protocols on which you are listed as either: Principal Investigator, Co-Principal Investigator, Administrative Contact, or Other Submitter. You must have edit access for a particular protocol in order to start an Amendment (revision) or Continuing Review (annual renewal) application for that protocol. NOTE: If you are listed in the "Other Personnel" section of a protocol, you only have read access to that protocol.

How do I print a protocol?

A PDF file of your protocol application form can be printed or saved to your computer. Once you have opened your protocol, navigate to the left-hand menu of the protocol application form, click on PRINT VIEW. A window will appear to allow you to customize your file/print out. The Adobe .PDF file will be generated; you may then save it to your computer or print it. Alternatively, you may download a PDF of the protocol by clicking on the version you want to download from the Event History page.

Why isn’t my protocol opening?

You most likely have pop-up blocking software turned on in your browser. Even if you believe you have allowed pop-ups, there may be additional toolbars, etc. that are blocking your pop-ups. Disable your pop-up blocking software. If you are still having problems, contact the IBC by emailing IBC@austin.utexas.edu.

Why can’t I see my approved protocols?

Your approved protocols appear on your eProtocol home page (the page you see when you first log in) in the section labeled "Approved Protocols."

For more information, see "How can I see certain protocols?".

Why can’t I start my amendment/continuing review application?

If the option to Start Continuing Review or Start Amendment is not available:

  1. You may not have EDIT access to this protocol. Select "Open in View Mode" and click on the left-hand menu option "Personnel Info". Only those folks listed in the first four roles (PI, Co-PI Admin Contact, Other Submitter) have access to EDIT the protocol and start continuing review applications.
  2. A continuing review or amendment may have already been started or is in-process for this protocol. Check on your HOME page, under PROTOCOL EVENT in the AMENDMENT or CONTINUING REVIEW section to see if an application has already been created. If an amendment or continuing review application is already in process, you must wait until the review process for the amendment or continuing review application has been completed before you can begin a new amendment or continuing review application for that protocol. This is a good reason to check your protocol carefully before submitting to the IBC.

Why can’t I see the reviewer comments?

IBC comments are used during the official review cycle after the protocol has been accepted for review. Each IBC comment needs to be addressed and the protocol needs to be modified as applicable

I closed my protocol before its 3-year expiration. Can I reactivate the protocol?

No. While you cannot "reactivate" a closed protocol, you may clone the closed protocol and submit for IBC review. Before submission, ensure that all of the information is current and correct.

I’ve created a new protocol in error. How can I delete it?

  • Log in to eProtocol IBC with your UT EID and password.
  • Click on the blue "DELETE PROTOCOL" button.
  • Select the protocol you wish to delete by selecting the checkbox next to the protocol.
  • Press the blue "DELETE" button. A pop-up window will appear asking, "Do you want to delete this protocol?" Select "YES".

I need additional help with eProtocol

Please see our eProtocol IBC Information (PDF) for more helpful details on eProtocol.

Protocol Review Process

What are the different kinds of IBC reviews?

The IBC utilizes a combination of Full Committee review, Designated Review, and Administrative Review. For details on the review process, visit the IBC Policies and Procedures, 4.1. Protocol Review.

How long will it take to get my protocol approved?

The review process is largely dependent upon how quickly Principal Investigators and/or their staff respond to reviewer comments and requests for additional information. The Office of Research Support and Compliance staff make every effort to maintain an expeditious review process and promptly review submissions.

For new protocols or third-year resubmissions, the turnaround time is usually about a month.

I have submitted my protocol, now what?

Once your protocol has been accepted for review it will be assigned a meeting date and assigned one or more IBC member(s) for review. Check your email regularly. You will receive an email for each major event in the review process, alerting you to when you need to log into the system and take a particular action. You can also see the status by looking at the protocol listing on your HOME page in the eProtocol application.

Where can I find the status of my submitted IBC protocol?

Visit eProtocol IBC to view the status of your submitted protocol. The column titled "Protocol Event" will describe the status of your submitted protocol. You may contact the IBC if you still have questions.

  • Yet to Submit to IBC: The protocol is in the creation phase, but has not been submitted to the IBC.
  • Submitted to Committee: The protocol has been submitted to the IBC for review.
  • Moved: The protocol has been moved from the assigned meeting date to some other meeting date
  • Tabled: The protocol has moved to a future IBC meeting for further discussion.
  • Comments Received (Cycle X): The protocol has received comments from the IBC reviewer(s).
  • Responses Sent (Cycle #): The PI has responded to the IBC reviewer comments and has sent the protocol and comments back to the IBC for review.
  • Resubmit the Protocol: The protocol application has been returned to the PI asking for changes to be made.
  • Resubmitted to Committee: The protocol application that was previously returned to the PI, has been resubmitted to the IBC for review.

How do I respond to IBC comments?

Click on the link "Comments Received (Cycle #) in the Protocol Events column to access the comments page.

You will need to:

  • Make the adjustments to the protocol itself (click the "GET PROTOCOL" button to open up a new window with the protocol)
  • Enter a response for each comment (and "SAVE")
  • Click the "SUBMIT TO IBC" button to send your responses and revised protocol back to the IBC.
  • NOTE: Clicking SAVE will save your responses to the comments. However, these responses are not sent to IBC until you click the SUBMIT TO IBC button.

When will my protocol be reviewed?

If you are submitting a new or three-year resubmission protocol and it has been accepted for review within the established deadlines, your protocol will be reviewed at the meeting date that is displayed in your eProtocol Investigator dashboard. Only complete protocols will be reviewed by the IBC. Simply submitting a protocol by the deadline does not mean that the protocol is ready for Committee review.

How soon can I expect to hear results from the IBC meeting?

The IBC staff will communicate the review status within five business days of the IBC meeting.

For how long is a protocol approved?

Protocols are approved for up to three years with a requirement of an annual continuing review application. The three-year period begins on the actual date of IBC approval. Third-year resubmissions must be received, reviewed, and receive approval prior to the expiration date of the original protocol.

How long will it take for my amendment to be approved?

The review process is largely dependent upon how quickly Principal Investigators and/or their staff respond to reviewer comments and requests for additional information. Office of Research Support and Compliance staff make every effort to maintain an expeditious review process and promptly review submissions.

For amendments, the turnaround time is usually about a month.

Protocol Amendments, Changes, and Modifications

How do I make changes to or modify a protocol?

Log into eProtocol; from the HOME screen select the protocol you want to modify and a small window will open. Select the amendment option and click "OK." Include a brief description of the modifications being requested in the amendment summary section. Make the desired changes/additions to the protocol application form. Submit the revision by clicking the "SUBMIT FORM" option in the left-hand column menu.

NOTE: if an amendment or continuing review is in‐process (that is created, submitted, and/or under review by the IBC) for the selected protocol, you must wait until the amendment has completed the review process before you can begin a new amendment for that protocol. This is a good reason to check your protocol carefully before submitting to the IBC.

When is it necessary for me to modify, amend, or make changes to my protocol?

An amendment is required whenever you need to change your protocol.

Remember: Any changes require approval by the IBC prior to implementation.

Do I always need to submit an amendment for changes in my protocol?

Yes. Any change requires approval by the IBC prior to implementation.

How do I change the title of my existing IBC protocol?

Submit an amendment form via eProtocol. Select the "Objective" tab from the left hand column. Modify the " Project Title" section. Include the reason for the title change in the amendment summary section. Select "Save" and proceed with additional modifications and/or submit the amendment.

I am requesting a change in protocol for a procedure done on a prior protocol. Can I just reference that protocol in my request?

No. Each protocol should be complete and be able to "stand alone." You are more than welcome to copy and paste the information into the amendment, but you will have to add your procedure to each protocol as applicable.

How long will it take for my amendment to be approved?

The review process is largely dependent upon how quickly Principal Investigators and/or their staff respond to reviewer comments and requests for additional information. Office of Research Support and Compliance staff make every effort to maintain an expeditious review process and promptly review submissions.

For amendments, the turnaround time is usually about a month.

Personnel/Personnel Requirements

Can I make a change in the principal investigator (PI) for a protocol?

Yes. Submit an amendment via eProtocol. Select the "Personnel Information" tab from the left hand column. Under the Principal Investigator section click on "Search." A "Find User" window will appear. Enter the new PI’s name or EID and click on "Find." Select the user and click "OK." The new PI’s information will now be populated in the Principal Investigator section. Select "Save" and proceed with additional modifications and/or submit your amendment.

Notes for success: A PI cannot remove him/herself from a protocol. Have another person with edit privileges submit the amendment to change the PI. If the previous PI still needs access to the protocol, move them to another role.

How do I add a new employee/laboratory member to my protocol?

Submit a protocol amendment via eProtocol. Include a training plan or their prior experience with the specific models & procedures in the protocol.

How do I remove an old employee/laboratory member from my protocol?

Submit a protocol amendment via eProtocol. If the removed personnel was performing training for other personnel, ensure they are removed from the appropriate training sections.

NOTE: To ensure the removed personnel’s name is deleted from all areas of the protocol, you can download a PDF of the protocol and search the PDF for their name, which will indicate which sections of the protocol need to be updated.

Doesn’t adding personnel take a long time for the IBC to approve?

No. Typical turnaround time is less than three business days for approval of adding personnel only; this does not include adding or replacing a PI. Personnel may NOT work on a study until the amendment to add them to the protocol has been approved by the IBC. Ensure that all required training is complete prior to submitting the amendment to ensure a quick turnaround. The IBC is required to assure that all personnel working on a study are:

  • Appropriately identified.
  • Trained and qualified.

The basic training requirement for being added to a protocol consists of completing online training modules. Training must be completed before personnel can be added to a protocol. A complete description of how to fulfill training requirements can be found on the IBC website.

What training is required to add personnel to a protocol?

The IBC requires that all personnel that conduct any research, teaching, or testing that involves recombinant or synthetic nucleic acid molecules (rsNA) and biohazardous agents, materials, and toxins to complete minimum training items. Protocols will not be reviewed by the IBC until all personnel listed on a protocol are up-to-date with the required training.

The basic training requirement for being added to a protocol consists of completing online training modules. A complete description of how to fulfill training requirements can be found on the IBC website.

Is it a serious issue if personnel are performing studies and they aren’t listed on the protocol?

Yes.

Who can I contact to discuss training issues and the process of adding personnel to a protocol?

Contact the IBC by email at IBC@austin.utexas.edu.

Continuing Reviews

What is a continuing review?

Although protocols are approved for up to three years, the IBC requires an annual continuing review. The continuing review application must be submitted with enough time prior to the required deadline to allow for processing and Committee review.

The continuing review is used to ensure continued compliance by providing current information regarding all ongoing activities. The submission is another opportunity to update personnel, contact information, etc.

How do I submit a continuing review?

To create a continuing review, log into eProtocol. From your Investigator dashboard, click on the protocol and then select the option "Start Continuing Review." A pop-up window will appear asking, "Do you want to open IBC Protocol IBC-0000-00000 (PI last name) for Editing?" Select "EDIT." Ensure you answer the questions provided. Once you have completed the form, click on "SUBMIT FORM" located on the left-hand column of the protocol screen. Once your continuing review has been successfully submitted the protocol event column will change to "SUBMITTED TO IBC" and you will receive an email confirming the submission.

NOTE: You can make any protocol modifications/changes at time of continuing review.

How long will it take for my continuing review to be approved?

The review process is largely dependent upon how quickly Principal Investigators and/or their staff respond to reviewer comments and requests for additional information. IBC staff make every effort to maintain an expeditious review process and promptly review submissions.

For continuing reviews, the turnaround time is usually about a month.

Is there anything I can do to speed up the review process?

Yes. Review each page of the protocol to ensure it is up to date; review personnel listings and training, attachments, etc.

I have submitted my continuing review form. When will I receive the notification of its renewal?

Once your continuing review form has been accepted for review it will be sent to the IBC for review. The IBC staff will communicate the review status within five business days of the IBC meeting.

Do I submit a continuing review if I am done with the study?

No. If all work has been completed, a Protocol Closure Report must be submitted to the IBC.

Third-Year Resubmissions

When my IBC protocol goes to the IBC for a third-year resubmission, will my protocol number change?

Yes. The IBC considers the third-year resubmission an entirely new protocol.

How do I submit a third-year resubmission?

Follow the same steps to submit a protocol as covered in FAQ E.4 and FAQ E.5. If you are cloning a protocol, ensure that all of the information is current and correct. The resubmission must be accepted for IBC review by the IBC meeting submission deadline date to be reviewed at the next scheduled meeting.

When should I clone a protocol?

If a majority of your procedures have stayed the same, then cloning your previous protocol may be a viable option in your resubmission process. Cloning your previous protocol, however, is not always the best option if a significant number of modifications are necessary in your three-year resubmission.

If there are no major protocol changes, can a short form be used that would only detail new or modified procedures?

No. You must complete and submit the three-year resubmission to allow ample time for IBC review.

Is there any way to extend my approval period?

No. If a third-year submission has not been processed and approved by the expiration date of the original IBC approval the work will expire. Should IBC approval expire, all activities involving recombinant or synthetic nucleic acid molecules (rsNA) and biohazardous agents, materials, and toxins must cease immediately.

Protocol Closure Reports (PCR)

Why do I need to submit a PCR if I am not renewing my protocol?

A PCR informs the IBC that you would like to close or end the protocol approval and gives the IBC information about the project outcomes. In addition a PCR will turn off any automatic reminders from eProtocol.

How do I submit a PCR?

To complete a PCR, visit eProtocol. Once logged in, select the protocol you wish to close, and then select the option "Start Closure Report Form." The form will automatically include the total number of animals previously reported. Ensure that you add the number of animals used since the last report. Submit the revision by clicking the "SUBMIT FORM" option in the left-hand column menu.

I’ve created a PCR in error. How can I delete it?

  • Log in to eProtocol IBC with your UT EID and password.
  • Click on the blue "DELETE PROTOCOL" button.
  • Select the protocol you wish to delete by selecting the checkbox next to the protocol.
  • Press the blue "DELETE" button. A pop-up window will appear asking, "Do you want to delete this protocol?" Select "YES".
  • NOTE: Only the unsubmitted PCR will be deleted and the existing approved protocol will remain.